End-of-line deflagration flame arrester endurance burning proof KITO® ZP/R-IIB-1/2″ -design with flange connection- End-of-line deflagration flame arrester endurance burning proof, as sampling device for filling of smallest quantities from containers and pipelines in which flammable media are stored or transported. Can also be used for aeration and ventilation. Approved for deflagrations of explosive vapour-air or […]
End-of-line deflagration flame arrester endurance burning proof KITO® ZP/R-IIB-1/2″ End-of-line deflagration flame arrester endurance burning proof, as sampling device for filling of smallest quantities from containers and pipelines in which flammable media are stored or transported. Can also be used for aeration and ventilation. Approved for deflagrations of explosive vapour-air or gas-air mixtures of explosion
End-of-line deflagration flame arrester endurance burning proof KITO® KA-DB-IIB-1/2” Fittings for screwing in armature housings, of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB with NSW >= 0.5 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and
(Resistance thermometer) For monitoring the temperature on the flame arrester element on the unprotected side (side of ignition source), mainly where a flow of flammable mixture is present for longer time. This could be e.g. in pipes to flares, ovens, fans, recuperation or thermal recovery units. In case of a temperature rise a stabilized burn
(with and without KITO® flame arrester) Application Warm-water / steam heating, as frost protection or to maintain temperatures in the armature housings. Maximum temperature of the heating medium: KITO®-flame arresters : Max. 25 K above the permissible operating temperature, but no more than 80% the ignition temperature other KITO®-armatures : • For flammable products max.
L 2 N Heating jackets for KITO®-End-of-line armatures Read More »
Deflagration flame arrester proof KITO® KA-IIB3-1/2” Fittings for screwing in armature housings, of deflagration-proof pressure relief valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB3 with NSW >= 0.65 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from
End-of-line deflagration flame arrester endurance burning proof KITO® SK/K-IIB1-… Fittings for screwing in armature housings, of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB1 with MESG ≥ 0.85 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and
End-of-line deflagration flame arrester endurance burning proof KITO® SK/K-IIA-… Fittings for screwing in armature housings, of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIA with MESG > 0.9 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and
(End-of-line and inline armatures with and without KITO® flame arrester) Application If an indication is desired or required (e. g. VdTÜV-guideline 967, §9.2.2.2), if the valve disk is in the position „closed“ or if a signal should be given if the valve opens.
(with and without KITO® flame arrester) Application HORST®-Heating sleeves can be used on valve housings and serve as frost protection heating or for temperature maintenance for ambient temperatures of -40 °C to +85 °C.
L 4 N Electrical heating sleeve for KITO®-Armatures Read More »